 |
|
||
|
|
P.O. Box 11550 |
|
|
||
|
|
P.O. Box 11550 |
|
Numerically Controlled Machines |
|||
|
|
QTY |
MAKE AND MODEL |
DESCRIPTION AND CAPABILITIES |
|
|
1 |
Mazak |
Turning Center - 25 HP; 8-inch chuck; 20.67-inch swing; 11.81-inch maximum cutting diameter; 2-inch maximum bar diameter with 21-inch maximum length; 5,000 rpm maximum; 1,181-inch/minute rapid traverse; live tooling 35-5000 rpm; 6-inch chuck sub-spindle; 400 rpm maximum; C-axis transverse.0005-inch diametric tolerance; .0004-inch taper over 16-inches; .001-inch positional tolerance on holes and contours. |
|
|
1 |
Cincinatti Sabre 1000 |
4-Axis Milling Center with Vickers Acramatic 2100 Control - 22 HP; 10,000 rpm; full contouring 4th axis; WindowsNT Ethernet link; in-process gaging and decision making package; 21 tool capacity; 40-inch X x 20-inch Y x 22-inch Z axis travel; 945-inches/minute rapid traverse; 540-inches/minute contouring; 1,540 lbs table load; .00016-inch positional and .00004-inch repeatable accuracy. |
|
Grinders |
|||
|
|
QTY |
MAKE AND MODEL |
DESCRIPTION AND CAPABILITIES |
|
|
1 |
Jones & Shipman |
Manual Surface Grinder - Air spindle; 5-inch diameter wheel; 7-inch high x 6-inch wide x 18-inch long; .0003-inch accuracy over chuck. |
|
|
1 |
Moore |
Jig Grinder - 13-inch high x 10-inch wide x 22-inch long table; 12,000, 40,000 and 60,000 rpm spindles; 3-inch maximum stroke; .0002-inch positional tolerance. |
|
|
1 |
Okomoto |
Automatic Surface Grinder - 10-inch high x 12-inch wide x 24-inch long table; .0004-inch accuracy over full electromagnetic chuck. |
|
|
1 |
Jones & Shipman 540 L |
Manual Surface Grinder - Air spindle; 5-inch diameter wheel; 7-inch high x 6-inch wide x 18-inch long with Diaform attachment; .0002-inch accuracy |
|
|
2 |
Jones & Shipman |
ID/OD Grinder - 12-inch diameter x 1-inch wide wheel; 7-inch swing; 22-inch stroke; 3,600 rpm main spindle; 20,000 rpm internal spindle. |
|
Electric Discharge Machines |
|||
|
|
QTY |
MAKE AND MODEL |
DESCRIPTION AND CAPABILITIES |
|
|
1 |
Charmille |
Wire Electric Discharge Machine - 12-inch x 16-inch programmable travel; 17-inch cut maximum; 30o taper maximum dependent on thickness of part; .0002-inch contour accuracy from skim cut mode. |
|
|
1 |
Charmille |
Vertical Sinker Electric Discharge Machine - 31-inch long x 19-inch wide x 15-inch high table; 10-inch RAM; 15-3/4 inch wide x 22-inch long working area; 12-1/2 inch X x 8-1/2 inch Y x 12-1/2 inch Z axis motion; 360o C-axis rotation; 4 micro-inch finish possible, 28 micro-inch finish average; .0002-inch form accuracy dependent on electrode; orbital function for relief; helical, spherical and tap production. |
|
Mills |
|||
|
|
QTY |
MAKE AND MODEL |
DESCRIPTION AND CAPABILITIES |
|
|
1 |
Bridgeport |
Manual Mill with automatic travel - 36-inch long x 9-inch wide x 13-inch high table; 35-inches/minute maximum feed; 6-inches/minute quill down feed. |
|
Measuring Equipment |
|||
|
|
QTY |
MAKE AND MODEL |
DESCRIPTION AND CAPABILITIES |
|
|
1 |
GageMaster |
Optical Projection Measuring Machine - 5-inch wide x 20-inch long table; 8-inch X x 6-inch Y x 12-inch Z axis travel; .0005-inch linear accuracy; 0.1o angular accuracy. |
|
|
1 |
Giddings & Lewis |
Direct Drive, Fully Programable Coordinate Measuring Machine - 16-inch high x 20-inch wide x 30-inch long programable area; accurate to .0005-inch non-progressional tolerance. |
|
|
1 |
Numerex |
Manually Controled, Fully Programable Coordinate Measuring Machine with statistical evaluation mode - 16-inch high x 24-inch wide x 24-inch long; accurate to .0005-inch non-progressional tolerance. |
Page Date: September 24, 2004
| Copyright © 1999, 2000, 2004 Martin Technologies, Inc. All rights reserved. Reproduction in part or in whole of any part of this page or its contents without the expressed consent of Martin Technologies, Inc., is prohibited. |
